Identification of Environmental Hotspots in Concrete Pavements of Nepal: A Cradle-to-Grave Life Cycle Assessment

Authors

  • Astha Devkota 1 Environmental Engineering Programme, Department of Civil Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University (https://ror.org/02rg1r889), Lalitpur 44700, Nepa;2 Department of Roads (DoR), Ministry of Infrastructure Development, Government of Nepal (https://ror.org/05gjrwv72), Kathmandu 44600, Nepal
  • Sahil Shrestha 1 Environmental Engineering Programme, Department of Civil Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University (https://ror.org/02rg1r889), Lalitpur 44700, Nepa; 2 Department of Water Supply and Sewerage Management (DWSSM), Ministry of Infrastructure Development, Government of Nepal (https://ror.org/05gjrwv72), Kathmandu 44600, Nepal https://orcid.org/0009-0001-3624-3130

DOI:

https://doi.org/10.63095/NBSEH.26.145800

Keywords:

Life cycle assessment, Global warming potential, Concrete Pavements, Material production

Abstract

Despite the rapid expansion of rigid road pavements in Nepal, their lifecycle environmental impacts remain largely unquantified. This study presents a cradle-to-grave Life Cycle Assessment (C2G-LCA) of a 1-km concrete pavement section along the Gwarko-Lamatar-Dahaltar (NH15) corridor. Results reveal that material production phase dominates overall environmental burdens, with cement production accounting for 86.1% of material-phase global warming potential (GWP) and driving roughly 89% of endpoint damages to both human health and ecosystem quality. These findings emphasise an urgent need to incorporate supplementary cementitious materials (SCMs), such as fly ash and GGBS, into regional pavement designs and green procurement policies, while examining their availability, substitution rates, and cost-carbon trade-off. Ultimately, this research establishes a strong foundation for practical, evidence-based planning for low-carbon infrastructure, directly supporting Nepal’s decarbonisation and climate resilience targets under Nationally Determined Contribution (NDC) 3.0.

Downloads

Download data is not yet available.

References

Kaiser, N., & Barstow, C. K., 2022, Rural transportation infrastructure in low- and middle-income countries: a review of impacts, implications, and interventions. Sustainability 14(4), Article 2149. https://doi.org/10.3390/su14042149

Anastasiou, E. K., Liapis, A., & Papayianni, I., 2015, Comparative life cycle assessment of concrete road pavements using industrial by-products as alternative materials. Resources, Conservation and Recycling 101, 1-8. https://doi.org/10.1016/j.resconrec.2015.05.009

Gouveia, B. G., Donato, M., & Da Silva, M. A. V., 2022, Life cycle assessment in road pavement infrastructures: a review. Civil Engineering Journal 8(6), 1304-1315. https://doi.org/10.28991/CEJ-2022-08-06-015

Guerrero-Bustamante, O., Camargo, R., Duque, J., Martinez-Arguelles, G., Polo-Mendoza, R., Acosta, C., & Murillo, M., 2025, Designing sustainable asphalt pavement structures with a cement-treated base (CTB) and recycled concrete aggregate (RCA): a case study from a developing country. Designs 9(3), Article 65. https://doi.org/10.3390/designs9030065

Polo-Mendoza, R., Mora, O., Duque, J., Turbay, E., Martinez-Arguelles, G., Fuentes, L., Guerrero, O., & Perez, S., 2023, Environmental and economic feasibility of implementing perpetual pavements (PPs) against conventional pavements: a case study of Barranquilla city, Colombia. Case Studies in Construction Materials 18, Article e02112. https://doi.org/10.1016/j.cscm.2023.e02112

National Planning Commission (NPC), 2020, The Fifteenth Plan (Fiscal Year 2019/20-2023/24) (Kathmandu, Nepal: National Planning Commission, Government of Nepal).

Chhetri, N. P., Jaiswal, R., & Poudel, R., 2024, Resilient roads in challenging terrain: a case study of Siddhartha highway in Nepal. Discover Civil Engineering 1(1), Article 76. https://doi.org/10.1007/s44290-024-00079-7

Sreedhar, S., Jichkar, P., & Biligiri, K. P., 2016, Investigation of carbon footprints of highway construction materials in India. Transportation Research Procedia 17, 291-300. https://doi.org/10.1016/j.trpro.2016.11.095

Santero, N. J., Masanet, E., & Horvath, A., 2011, Life-cycle assessment of pavements. Part I: critical review. Resources, Conservation and Recycling 55(9-10), 801-809. https://doi.org/10.1016/j.resconrec.2011.03.010

Zhao, L. L., Wang, Z. H., Liu, Y., Gong, X. Z., Gao, F., Cui, J. P., Jiang, Q., & Ma, L. P., 2015, Analysis on the global warming potential of cement concrete pavement in China. Materials Science Forum 814, 418-424. https://doi.org/10.4028/www.scientific.net/MSF.814.418

Khanal, S., & Dongol, R., 2025, Carbon footprint estimation in road construction: a case study of Pokhara-Mugling road, Nepal. Everest Advances in Science and Technology 1(1), 1-14. https://doi.org/10.3126/east.v1i1.88054

Aryan, Y., Dikshit, A. K., & Shinde, A. M., 2023, A critical review of the life cycle assessment studies on road pavements and road infrastructures. Journal of Environmental Management 336, Article 117697. https://doi.org/10.1016/j.jenvman.2023.117697

Huang, X., Huang, Z., Zhou, Y., Hu, R., & Hu, B., 2025, Life cycle assessment and cost analysis of LC3 concrete considering sustainability and uncertainty. Journal of Building Engineering 102, Article 111960. https://doi.org/10.1016/j.jobe.2025.111960

Fan, H., Yu, H., Ma, H., Chen, X., Li, L., Du, Q., Zhang, M., Ma, H., & Wu, C., 2025, Refinement and application of life cycle assessment (LCA) for concrete: Development of a carbon emission metric normalized by salt-freezing durability and its use in designing high-durability, low-carbon, high-performance concrete. Sustainable Materials and Technologies 45, Article e01622. https://doi.org/10.1016/j.susmat.2025.e01622

Bureau of Indian Standards, 2006, IS/ISO 14040: Environmental Management - Life Cycle Assessment - Principles and Framework (New Delhi, India: Bureau of Indian Standards).

Department of Roads (DoR), 2023, Statistics of National Highway (SNH) 2022/23 (Kathmandu, Nepal: Department of Roads, Government of Nepal).

Department of Roads (DoR), 2018 AD, Norms for Works: Road and Bridges (Kathmandu, Nepal: Department of Roads, Government of Nepal).

Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B., 2016, The Ecoinvent database version 3 (part I): overview and methodology. International Journal of Life Cycle Assessment 21(9), 1218-1230. https://doi.org/10.1007/s11367-016-1087-8

Department of Roads (DoR), 2021, Rigid Pavement Guideline 2021 (Kathmandu: Department of Roads, Government of Nepal).

Karn, S., Jha, A. K., Maharjan, A., & Darlami, H. B., 2023, "Impact of electric vehicle on energy demand in Nepal using a scenario-based approach." Presented at the 14th IOE Graduate Conference, Institute of Engineering, Pulchowk, NP, 29 November-1 December.

Huijbregts, M. A. J., Steinmann, Z. J. N., Elshout, P. M. F., Stam, G., Verones, F., Vieira, M., Zijp, M., Hollander, A., & van Zelm, R., 2017, ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level. International Journal of Life Cycle Assessment 22(2), 138-147. https://doi.org/10.1007/s11367-016-1246-y

Hoxha, E., Vignisdottir, H. R., Barbieri, D. M., Wang, F., Bohne, R. A., Kristensen, T., & Passer, A., 2021, Life cycle assessment of roads: exploring research trends and harmonization challenges. Science of the Total Environment 759, Article 143506. https://doi.org/10.1016/j.scitotenv.2020.143506

Sousa, S. R., Soares, S. R., Moreira, N. G., Severis, R. M., & De Santa-Eulalia, L. A., 2021, Internal normalization procedures in the context of LCA: a simulation-based comparative analysis. Environmental Modeling & Assessment 26(3), 271-281. https://doi.org/10.1007/s10666-021-09767-5

Pizzol, M., Laurent, A., Sala, S., Weidema, B., Verones, F., & Koffler, C., 2017, Normalisation and weighting in life cycle assessment: quo vadis? International Journal of Life Cycle Assessment 22(6), 853-866. https://doi.org/10.1007/s11367-016-1199-1

Bureau of Indian Standards, 2009, IS/ISO 14044: Environmental Management - Life Cycle Assessment - Requirements and Guidelines (New Delhi, India: Bureau of Indian Standards).

Loijos, A., Santero, N., & Ochsendorf, J., 2013, Life cycle climate impacts of the US concrete pavement network. Resources, Conservation and Recycling 72, 76-83. https://doi.org/10.1016/j.resconrec.2012.12.014

Singh, A., Vaddy, P., & Biligiri, K. P., 2020, Quantification of embodied energy and carbon footprint of pervious concrete pavements through a methodical lifecycle assessment framework. Resources, Conservation and Recycling 161, Article 104953. https://doi.org/10.1016/j.resconrec.2020.104953

Ivel, J., Watson, R., Abbassi, B., & Abu-Hamatteh, Z. S., 2020, Life cycle analysis of concrete and asphalt used in road pavements. Environmental Engineering Research 25(1), 52-61. https://doi.org/10.4491/eer.2018.399

Ma, F., Sha, A., Yang, P., & Huang, Y., 2016, The greenhouse gas emission from Portland cement concrete pavement construction in China. International Journal of Environmental Research and Public Health 13(7), Article 632. https://doi.org/10.3390/ijerph13070632

Rangelov, M., Dylla, H., Dobling, B., Gudimettla, J., Sivaneswaran, N., & Praul, M., 2022, Readily implementable strategies for reducing embodied environmental impacts of concrete pavements in the United States. Transportation Research Record: Journal of the Transportation Research Board 2676(9), 436-450. https://doi.org/10.1177/03611981221086934

K.C., A. K., Ghimire, A., Adhikari, B., Aryal, A., & Baral, B., 2025, Embodied energy and associated carbon emission of key building materials in Nepal. Discover Environment 3(1), Article 15. https://doi.org/10.1007/s44274-025-00194-x

Chaulagain, A., Lama, P., Adhikari, A., Mandal, S., & Uprety, B., 2025, Comparative life cycle assessment of decarbonization pathways for cement production in Nepal. Energy Conversion and Management: X 28, Article 101284. https://doi.org/10.1016/j.ecmx.2025.101284

Andrew, R. M., 2018, Global CO2 emissions from cement production. Earth System Science Data 10(1), 195-217. https://doi.org/10.5194/essd-10-195-2018

International Energy Agency (IEA), 2018, Technology Roadmap: Low-Carbon Transition in the Cement Industry (Paris, France: IEA/World Business Council for Sustainable Development, Cement Sustainability Initiative).

NITI Aayog, 2026, Scenarios Towards Viksit Bharat and Net Zero - Sectoral Insights: Industry (Vol. 4) (New Delhi: Government of India).

International Renewable Energy Agency (IRENA), 2024, Iron and steel (Abu Dhabi, UAE: IRENA).

Pizoń, J., Poranek, N., & Horňáková, M., 2026, Life cycle assessment of concrete containing crushed concrete paving blocks as a sustainable replacement for natural aggregates. Sustainability 18(6), Article 2703. https://doi.org/10.3390/su18062703

Koh, D., Tokbolat, S., & Blaauw, S. A., 2024, Life cycle assessment of pavement construction: a case study. IOP Conference Series: Earth and Environmental Science 1363(1), Article 012065. https://doi.org/10.1088/1755-1315/1363/1/012065

Ige, O. E., Duffy, K. J., Olanrewaju, O. A., & Collins, O. C., 2024, Measuring the environmental impact and uncertainty analysis of Portland cement production in South Africa: a ReCiPe 2016 v1.04 endpoint method approach. In: V., Kumar (Ed.), Global Warming - A Concerning Component of Climate Change (IntechOpen). https://doi.org/10.5772/intechopen.1004055

Bulle, C., Margni, M., Patouillard, L., Boulay, A.-M., Bourgault, G., De Bruille, V., Cao, V., Hauschild, M., Henderson, A., Humbert, S., Kashef-Haghighi, S., Kounina, A., Laurent, A., Levasseur, A., Liard, G., Rosenbaum, R. K., Roy, P.-O., Shaked, S., Fantke, P., & Jolliet, O., 2019, IMPACT World+: a globally regionalized life cycle impact assessment method. International Journal of Life Cycle Assessment 24(9), 1653-1674. https://doi.org/10.1007/s11367-019-01583-0

Wolde, M. G., Khatiwada, D., Bekele, G., & Palm, B., 2024, A life cycle assessment of clinker and cement production in Ethiopia. Cleaner Environmental Systems 13, Article 100180. https://doi.org/10.1016/j.cesys.2024.100180

Campbell-Lendrum, D., & Corvalán, C., 2007, Climate change and developing-country cities: implications for environmental health and equity. Journal of Urban Health 84(S1), 109-117. https://doi.org/10.1007/s11524-007-9170-x

Souza Zorzenão, P. C. D., dos Santos Silva, J. C., Bufato Moreira, C. A., Pinto, V. M., Tadano, Y. D. S., Yamamoto, C. I., & Godoi, R. H. M., 2024, Impacts of PM2.5 exposure near cement facilities on human health and years of life lost: a case study in Brazil. Journal of Environmental Management 370, Article 122975. https://doi.org/10.1016/j.jenvman.2024.122975

Olagunju, B. D., & Olanrewaju, O. A., 2021, Life cycle assessment of Ordinary Portland Cement (OPC) using both problem oriented (midpoint) approach and damage oriented approach (endpoint). In: A. Petrillo & F. De Felice (Eds.), Product Life Cycle - Opportunities for Digital and Sustainable Transformation (IntechOpen). https://doi.org/10.5772/intechopen.98398

Zhou, X., Strezov, V., Jiang, Y., Yang, X., He, J., & Evans, T., 2020, Life cycle impact assessment of airborne metal pollution near selected iron and steelmaking industrial areas in China. Aerosol and Air Quality Research 20, 1582-1590. https://doi.org/10.4209/aaqr.2019.10.0552

Fente, T. E., & Tsegaw, A. A., 2024, Environmental impact assessment of steel reinforcing bar manufacturing process from scrap materials using life cycle assessment method: a case study on the Ethiopian metal industries. Discover Applied Sciences 6(2), Article 53. https://doi.org/10.1007/s42452-024-05709-4

Ding, C., Wang, Y., Tang, T., Mishra, S., & Liu, C., 2018, Joint analysis of the spatial impacts of built environment on car ownership and travel mode choice. Transportation Research Part D: Transport and Environment 60, 28-40. https://doi.org/10.1016/j.trd.2016.08.004

Nguyen, L., Moseson, A. J., Farnam, Y., & Spatari, S., 2018, Effects of composition and transportation logistics on environmental, energy and cost metrics for the production of alternative cementitious binders. Journal of Cleaner Production 185, 628-645. https://doi.org/10.1016/j.jclepro.2018.02.247

Ministry of Forests and Environment (MoFE), 2025, Nepal's Third Nationally Determined Contribution (NDC 3.0) (Kathmandu: Government of Nepal).

Generowicz-Caba, N., & Kulczycka, J., 2025, LCA of cement with alternative additives: pathways to sustainable production. Materials 18(13), Article 3057. https://doi.org/10.3390/ma18133057

Orozco, C., Babel, S., Tangtermsirikul, S., & Sugiyama, T., 2024, Comparison of environmental impacts of fly ash and slag as cement replacement materials for mass concrete and the impact of transportation. Sustainable Materials and Technologies 39, Article e00796. https://doi.org/10.1016/j.susmat.2023.e00796

Tao, Y., Gautam, B. P., Pradhan, P. M., & Hu, C., 2022, Characterization and reactivity of Nepali clays as supplementary cementitious material. Case Studies in Construction Materials 16, Article e00947. https://doi.org/10.1016/j.cscm.2022.e00947

Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S., 2018, Calcined clay limestone cements (LC3). Cement and Concrete Research 114, 49-56. https://doi.org/10.1016/j.cemconres.2017.08.017

Mostafa, A., Khater, H. M., Gharieb, M., & Anwar, M., 2025, Sustainable cement production: minimizing CO2 by optimizing efficiency with LC3. Discover Applied Sciences 7(7), Article 684. https://doi.org/10.1007/s42452-025-07298-2

Osorio-Tejada, J. L., Llera-Sastresa, E., & Scarpellini, S., 2022, Environmental assessment of road freight transport services beyond the tank-to-wheels analysis based on LCA. Environment, Development and Sustainability 26(1), 421-451. https://doi.org/10.1007/s10668-022-02715-7

Kurda, R., Silvestre, J. D., & De Brito, J., 2018, Life cycle assessment of concrete made with high volume of recycled concrete aggregates and fly ash. Resources, Conservation and Recycling 139, 407-417. https://doi.org/10.1016/j.resconrec.2018.07.004

Nepal’s infrastructure surge relies on durable concrete rigid pavements to reshape thousands of kilometres of national roadways. This research uses a cradle-to-grave life cycle assessment (C2G-LCA) to evaluate a 1 km rigid pavement. The findings revealed that material production—mainly cement—drives 87.32% of lifecycle global warming potential (711.27 tons CO2 eq.) and approximately 89% of endpoint damages to ecosystem and human health damage, with cement being the major contributor to the material-phase impacts. By mandating low-carbon cement and embodied carbon thresholds in road contracts, Nepal can substantially decarbonize its expanding transport network.

Downloads

Additional Files

Published

2026-10-07

How to Cite

Devkota, A., & Shrestha, S. (2026). Identification of Environmental Hotspots in Concrete Pavements of Nepal: A Cradle-to-Grave Life Cycle Assessment . Natural Built Social Environment Health, 2(5), 32–53. https://doi.org/10.63095/NBSEH.26.145800

Funding data